{"product_id":"invisible-oil-primer-woca","title":"Invisible Oil Primer","description":"\u003cp\u003eInvisible Oil Primer is a water-based wood primer with excellent adhesion that gives wood a matte, untreated appearance when used in combination with WOCA Invisible Oil. Invisible Oil Primer is the first step in a high-quality water-based oiling system and should therefore be used in combination with WOCA Invisible Oil. The Invisible system was developed for use on light-colored woods that require a good oiling quality and a freshly sanded, untreated appearance. The range gives floors a soft, comfortable surface to walk on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e • Gives the floor an untreated look\u003cbr\u003e • Resistant to liquids such as water, coffee, tea and red wine\u003cbr\u003e • Gives wood a beautiful, breathable surface\u003cbr\u003e • IBR Certificate\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eFor preparing untreated, new, or freshly sanded wood surfaces made of light-colored wood species. After preparation, treat with Invisible Oil and Invisible Oil Treatment.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e It's important that both the wood and the paint are at least 15°C (preferably around 20°C) and that the humidity is around 50%. Make sure the room is well ventilated to allow for optimal evaporation and drying times. The wood must be freshly sanded, using 100-150 grit for the final sanding. Vacuum thoroughly. Wash the floor with WOCA Intensive Wood Cleaner and let it dry for at least 8 hours before applying the primer. Always remember to test on a less visible area to verify the product's compatibility with the surface.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFinal sanding\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Grain 100-150.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eTreatment\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eShake the primer container well both before and during use. Mix containers with different batch numbers to avoid color differences. Apply an even coat of primer using a short-haired paint roller. Work on small areas no larger than 20 m2 at a time. Allow the primer to penetrate for up to 5 minutes. Rub the primer into the wood until the floor looks saturated. Use a polisher with a beige or burgundy pad. Change the polishing pad regularly to avoid primer buildup. Remove excess primer with lint-free cotton cloths or pads applied to the polisher until the surface no longer looks wet. Allow the floor to dry for 3-4 hours. Between coats, sand the surface using a burgundy pad or a paint polishing pad and vacuum thoroughly. Apply WOCA Invisible Oil. Carefully follow the product instructions.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eAfter 24 hours, we recommend treating the surface with Invisible Oil Care to improve the floor's resistance to stains and wear.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Drying time: before treatment with Invisibile Oil: approximately 3-4 hours at 20°C\u003c\/p\u003e\n\n\u003cp\u003e Full hardening: 7 days at 20°C\u003c\/p\u003e\n\n\u003cp\u003e Recommendation: Do not expose the floor to water for the first 7 days while the oil is hardening.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDensity\u003c\/strong\u003e : 1.00-1.10 g\/ml\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDry matter content\u003c\/strong\u003e : 12%\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDuration\u003c\/strong\u003e : 3 years\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eApplication temperature\u003c\/strong\u003e : 15-30°C\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eViscosity\u003c\/strong\u003e : approx. 25 sec.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eYield\u003c\/strong\u003e : 8-12 m2\/L, depending on the type of wood and surface\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eColors\u003c\/strong\u003e : neutral\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCleaning utensils\u003c\/strong\u003e : hot water.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eStorage\u003c\/strong\u003e : 10-25°C. Store with care. Keep out of reach of children. Do not expose to heat (e.g., sunlight). Store away from frost.\u003c\/p\u003e\n\n \u003cp\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e : This product contains a maximum of 10 g VOC\/L. The permitted value is 500 g VOC\/L (cat.A\/i).\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFormats\u003c\/strong\u003e : 2.5 L\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eApprovals\u003c\/strong\u003e : Danish approval for indoor climate IBR: TVOC28\/A+, AgBB Z-157.10-198\u003c\/p\u003e","brand":"WOCA Denmark","offers":[{"title":"2.5L","offer_id":51135601082699,"sku":"Item Number: 526025A","price":74.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/3055\/8027\/files\/invisible_oil_primer_2_5L_526025A_5d9206e6-3879-4f49-af14-c4a0e6337680.png?v=1737637407","url":"https:\/\/www.dallagreen.com\/en\/products\/invisible-oil-primer-woca","provider":"DallaGreen","version":"1.0","type":"link"}