Diamond Oil Active

Use Diamond Active Maintenance Oil for the permanent care and maintenance of your oiled wood floor. This exclusive, odorless, and extremely durable maintenance oil is made with the highest-quality raw materials to benefit both you and your oiled floor. In addition to being very easy to use and ensuring minimal product waste, the maintenance oil refreshes the wood's natural warm glow and increases resistance to stains and debris through a unique hyper-crosslinking technology. Diamond Active Maintenance Oil is suitable for both manual and machine application on oiled floors.
• Resistant to liquids such as water, coffee, tea and red wine
• Scratch and stain resistant
• Gives wood a beautiful, breathable surface
• IBR Certificate

Preparation

It is important that the product, room, and floor have a temperature between 15°C and 30°C, and that the humidity is approximately 50%. The wood moisture content should not exceed 12%. Ensure the room is well ventilated for optimal evaporation and drying time. The surface must be free of dirt, grease, and wax. Clean the floor with WOCA Intensive Wood Cleaner and let it dry for at least 8 hours, or until completely dry. Always remember to test on a less visible area to verify the product's compatibility.

Treatment

Shake the Diamond Active Maintenance Oil container well both before and after use. Apply approximately 1 dl of oil per 4 m² of floor using a buffer, a short-haired paint roller (3-4 mm), or a polisher with a white or beige pad on slightly larger areas. Ensure the oil is well rubbed into the wood. Continue polishing until the wood appears saturated and the surface has a uniform appearance. Remove excess oil with clean, lint-free cotton cloths before proceeding to the next section. The surface should not look wet, and no excess oil should remain on it. Continue using the above method until the entire floor has been treated. If the floor is polished with a polisher, use it carefully after 4 hours of drying time at 20°C. If polished manually, the floor can be used carefully after approximately 24 hours.

Note

Do not expose the floor to water or wash it for the first 3 days, while the oil dries.

Drying time

Drying time with
machine polishing: 4 hours at 20°C

Drying time with
hand polishing: 24 hours at 20°C

Full hardening: 3 days at 20°C

Recommendation: Do not expose the floor to water or clean it for the first 48 hours while the oil is hardening.

Density : 0.90 g/ml

Dry matter content : approximately 70%

Duration : 3 years.

Application temperature : 15-30 °C

Coverage : 40-50 m²/L, depending on the type of wood and surface.

Colors : natural, white, extra-white.

Cleaning tools : WOCA Solvent or terpentine.

Storage : 10-25°C. Keep out of reach of children. Do not expose to heat (e.g., sunlight). Store away from frost.

VOC : This product contains a maximum of 100 g VOC/L. The permitted value is 500 g VOC/L (cat.A/i).

Formats : 1 L - 2.5 L

Approvals : Danish approval for indoor climate IBR: TVOC28/A+, AgBB Z-157.10-198

Diamond Oil Active Technical Data Sheet

Diamond Oil Active Safety Data Sheet

Shipped within 24 hours via express courier

Delivery times:

• 24-48 hours Italy
• 5-7 days Europe

Returns can be made within 14 days of delivery. We accept returns provided the purchased products are shipped in the same condition as originally received, i.e., sealed and undamaged. Returns are not possible if the product has been opened or partially used.