Intensive Wood Cleaner

Intensive Wood Cleaner is a product specially developed for cleaning all interior wooden surfaces, such as furniture, floors, kitchen tables, etc., and can be used on untreated, oiled, or painted surfaces. Intensive Wood Cleaner is a basic cleaner that can be used for particularly stubborn stains or before treating a surface with, for example, oil, paint, or soap.

• For unfinished or oil, wax, varnish or soap treated wooden surfaces indoors
• Prepares surfaces for subsequent treatment
• Basic cleaning and grease removal
• High efficiency

Areas of application

Cleaning of new, untreated, sanded, and treated wood. Ideal for all wood species.

Preparation

Use WOCA Wood Stain Remover for particularly stubborn stains. Always remember to test the product on a less visible area to ensure the surface is compatible with the product.

Treatment (spray)

Shake the bottle well before use. Spray Intensive Wood Cleaner onto the surface. Let the mixture sit for 5 minutes before rinsing with clean water. Let the surface dry for 2-8 hours, depending on subsequent treatments.

Treatment (1 L - 2.5 L)

Light treatment : Mix Intensive Wood Cleaner with warm water. See mixing ratio below. Wash the wood surface with a well-wrung mop. Let the surface dry completely before applying the next treatment.

• Untreated, soap-treated or oil-treated surfaces: Mix 125 ml of Intensive Wood Cleaner with 2.5 L of warm water.

• Lacquered or painted wooden surfaces: Mix 125 ml of Intensive Wood Cleaner with 5 L of hot water.

Optimal result : for optimal results, work with two buckets: one with soapy water and the other with clean water for rinsing the dirty mop.

• Untreated wooden surfaces:

1. Mix 250 ml of Intensive Wood Cleaner with 5 L of hot water.
2. Wash the wood surface with a well-wrung mop. Repeat the process for very dirty surfaces.
3. Allow the surface to dry completely before carrying out the next treatment.

• Treat with soap or oil:

1. Mix 250 ml of Intensive Wood Cleaner with 5 L of hot water.
2. Wash the wood surface with a well-wrung mop. For best results, let the Wood Cleaner solution soak in for 5 minutes and then rinse again with clean water. If necessary, you can clean the surface with a hand pad or a floor cleaner. For very dirty surfaces, repeat the process.
3. Allow the surface to dry completely before carrying out the next treatment.
4. Intensive Wood Cleaner is a heavy-duty, deep-acting cleaner; therefore, surfaces will need to be re-treated with oil/wax or soap.

• Painted wooden surfaces:

1. Mix 125 ml of Intensive Wood Cleaner with 5 L of hot water.
2. Wash the wooden surface with a well-wrung mop.
3. Refresh lacquered surfaces with WOCA Master Care.

Drying time

2-8 hours at 20°C

Composition (1 L - 2.5 L) : less than 5%: non-ionic surfactants, cationic surfactants, EDTA and salts.

Composition (Spray) : less than 5%: non-ionic surfactants, Pyrithione sodium, BENZISOTHIAZOLINONE.

Density : 1.04 g/ml

pH : 10.5

Duration : 36M

Application temperature : 15-30 °C

Yield : 200-300 m^2/L

Colors : colorless.

Mixing ratio (1 L - 2.5 L) : 1:20-1:40, depending on the degree of dirt or surface.

Mixing ratio (Spray) : Ready to use.

Storage: 10-25°C. Keep out of reach of children. Do not expose to heat (e.g., sunlight). Store in a frost-free place during the winter and in a cool place during the summer.

Formats : 0.75 L - 1 L - 2.5 L

Authorizations : Indoor Climate Labeled

Intensive Wood Cleaner Spray Technical Data Sheet

Intensive Wood Cleaner Technical Data Sheet

Safety Data Sheet Intensive Wood Cleaner Spray

Safety Data Sheet Intensive Wood Cleaner

Shipped within 24 hours via express courier

Delivery times:

• 24-48 hours Italy
• 5-7 days Europe

Returns can be made within 14 days of delivery. We accept returns provided the purchased products are shipped in the same condition as originally received, i.e., sealed and undamaged. Returns are not possible if the product has been opened or partially used.