Master Colour Oil

Master Colour Oil offers colour and protection in a single product. The oil penetrates the wood and provides a wear-resistant surface with high water and dirt resistance. It is perfect for interior use on all unfinished, new or recently sanded surfaces of all types of wood.

• Resistant to dirt and liquids, e.g. water, coffee, tea and red wine
• Available in many different colors
• Gives wood a beautiful, breathable surface
• Approved for internal climate

Preparation

The product, room, and floor temperatures should be between 15 and 30°C. Wood humidity should not exceed 12%. Ensure good ventilation during application and drying. The wood must be freshly sanded; use 100-120 grit sandpaper for final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and let it dry for at least 8 hours before applying the oil. Always remember to test on a less visible area to verify the wood's compatibility with the product.

Final sanding

Grain 100-120.

Treatment

Shake the Master Colour Oil container well both before and after use. Mix containers with different batch numbers to avoid color differences. Apply an even coat of oil using a short-haired paint roller (4-6 mm). Work on small areas no larger than 10 m2 at a time. Allow the oil to penetrate for 10-20 minutes. If the oil is quickly absorbed by the wood, apply more oil. Rub the oil into the wood until the surface looks saturated. Use a polishing machine with a beige pad for large areas and a polishing cloth/pad for small areas. Remove excess oil with lint-free cotton cloths or pads until the surface is no longer wet. Continue until the entire area has been polished and the excess oil is thoroughly removed. To ensure good saturation, the surface should be re-polished with 1 L of Master Colour Oil per 10 m2 within 6-12 hours after the first application. Buff the oil thoroughly as described above.

Note

Do not expose the surface to water or clean it for the first 7 days while the oil is hardening. After 7 days, the floor can be cleaned with WOCA Natural Soap, which provides additional protection.

Drying time

12-24 hours at 20°C.

Complete hardening

5-7 days at 20°C and 55% humidity.

Density : 0.90-0.95 g/ml

Dry matter content : approx. 60%

Duration : 36M

Application temperature : 15-30°C.

Yield : 10-12 m^2/L

Coverage (diluted solution) : approx. 10-12 m^2/L, depending on wood type and surface

Colors : natural, white, extra-white.

Cleaning tools : with WOCA solvent or turpentine.

Storage : 10-25°C. Keep out of reach of children. Do not expose to heat (e.g., sunlight). Store away from frost in winter and in a cool place in summer.

VOC : This product contains a maximum of 370 g VOC/L. The permitted value is 500 g VOC/L (cat.A/i).

Formats : 1 L - 2.5 L

Approvals : Danish approval for indoor climate IBR: TVOC28/A+, GIS: Ö60

Master Colour Oil Technical Data Sheet

Shipped within 24 hours via express courier

Delivery times:

• 24-48 hours Italy
• 5-7 days Europe

Returns can be made within 14 days of delivery. We accept returns provided the purchased products are shipped in the same condition as originally received, i.e., sealed and undamaged. Returns are not possible if the product has been opened or partially used.